Calendario

Enero 2016
LunMarMierJueVierSabDom
 << <Jun 2017> >>
    123
45678910
11121314151617
18192021222324
25262728293031

Anuncio

¿Quién está en línea?

Miembro: 0
Visitante: 1

rss Sindicación

Anuncio de los artículos posteados en: Enero 2016

En292016

hanfsamen

hanfsamen - hier kann man ganz einfach von zuhause aus hanfsamen ganz anonym und sicher hanfsamen shoppen

Admin · 12 vistas · Escribir un comentario
En292016

hanfsamen shop

hanfsamen shop - hier kann man ganz einfach von zuhause aus hanfsamen ganz anonym und sicher hanfsamen shoppen

Admin · 15 vistas · Escribir un comentario
En282016

Precisely what are Solar Panels?

green energy - The sun may be the primary energy source on this planet and sunlight could be converted directly into electricity using solar panel systems. Electricity is becoming indispensable in everyday life. It powers the machines that a lot of us use daily.


So, what exactly are solar power panels? What if you may earn your individual?


In this post, we are going to explain to you an easy technique of building your own functional solar panel.


The ingredients


A screen is often produced from six (6) components namely the PV (photovoltaic) cell or solar panel which generates the facility, the glass which covers and protects the solar cells, the frame which gives rigidity, the backsheet where the solar panels are laid, the junction box in which the wirings are enclosed and connected, along with the encapsulant which may serve as adhesives.


As most people doesn't need access to equipment in manufacturing solar power systems, it is important to note and understand those six components to ensure that one to be able to plan the materials required to build a do-it-yourself or home-made cell.


The materials needed on how to produce a solar panel should be available for purchase locally or online and should not exceed the cost of a whole new cell or does not take too much time to construct.


1.) PV Cell


The first thing to consider when building your own screen is the solar panel.


Photovoltaic (PV) cell or solar cell converts visible light into electricity. One (1) solar panel however just isn't enough to make a usable level of electricity much like the microbot in Baymax (Hero 6) which only becomes useful when combined as being a group. This basic unit generates a DC (dc) voltage of 0.5 to 1 volt and although this can be reasonable, the voltage remains to be too small for some applications. To make a useful DC voltage, the solar panels are connected in series and then encapsulated in modules making the cell. If a person cell generates 0.5 volt and is attached to another cell in series, those two cells should then manage to produce 1 volt and they also will then be called a module. A standard module usually is made up of 28 to 36 cells in series. A 28-cell module should be able to produce roughly 14 volts (28 x 0.5 = 14VDC) which is enough to charge a 12V battery or power 12V devices.


Connecting a couple of solar panels require that you've got a basic knowledge of series and parallel connection which has similarities to connecting batteries to produce up battery power storage system.


There's 2 most typical solar panels that can be purchased out there; a monocrystalline cell along with a polycrystalline cell. These two may have precisely the same size, 156mm x 156mm, nevertheless the main difference can be efficiency. You should purchase additional cells to offer as backup if you happen to fail on some of the cells i.e. bad solder, broken cell, scratched, etc.


Monocrystalline solar cells usually are black and octagonal healthy. Such a solar cell is made from the greatest and purest grade silicon which makes them expensive. But you are the best of all of cells and so are typically the option of solar contractors when space is an important step to look into having this power they want to attain depending on their solar system design.


Polycrystalline PV Cells are seen as a their bluish color and rectangular shape. These cells are designed within a much simpler process which lowers the purity from the silicon content plus lowers the efficiency of the end result.


Generally, monocrystalline cells tend to be efficient than polycrystalline cells however does not necessarily mean that monocrystalline cells perform and outputs more power than polycrystalline cells. Solar panel efficiency has something to do with the size of cells and every solar panel or cells provide an efficiency rating depending on standard tests whenever they were manufactured. This rating is generally in percentage and also the common values range from 15% to 20%.


2.) Glass


The glass protects the Solar cells while allowing optimal sunlight to give. Usually made from anti-reflective materials. Tempered glass could be the selection of material nowadays for unknown and new manufacturers although there remain people who utilize flat plate glass on his or her solar power systems. Tempered glass are set up by chemical or thermal means which is more often than not stronger than plate glass which makes it higher priced to generate nevertheless the price of manufacturing them today is cheap and cost-effective. Flat plate glass creates sharp and long shards when broken rather than tempered glass which shatters safely in small pieces upon impact, for this reason additionally, they refer to it safety glass. It ought to be noted here that a lot of amorphous solar panel systems uses flat plate glass with the way the panel is made.


Tempered glass is the thing that manufacturers use within mass producing their solar panel systems. Within our DIY project, we advise to make use of Plexiglas otherwise known as acrylic glass which is safer compared to regular normal glass out of your local home improvement center. It is a bit expensive than regular glass but is weather resistant and will not break easily. The Plexiglas may also be screwed or glued easily to the frame.


3.) Frame


A frame is often created from anodized aluminum which offers structure and rigidity for the solar module. These aluminum frames are also built to be suitable for most solar mounting systems and grounding equipment for straightforward and safe installation over a roof or on the ground.


The frame in a factory-built solar power is truly the aluminum part where all 4 sides from the solar power sheet are inserted. Think of it as a skeletal rectangular frame. The screen sheet mind you is made up of the other 4 components and so are layered and laminated in the following order throughout; the tempered glass, top encapsulant, the cells, bottom encapsulant, then a backsheet. In our DIY solar panel, we will be utilizing a wooden frame and the end-result would be something analogous to some picture frame the place that the picture will be the solar panels glued with a non-conductive board, the glass for the Plexiglas top cover, and the wooden part because the frame and backsheet.


4.) Backsheet


The backsheet is the layer of plastic film on the back top of the module. Here is the only layer protecting the module from unsafe DC voltage. The principle function of the backsheet is to insulate and protect the handler from shock and provide the safest, efficient, and dependable electrical conductivity possible.


The backsheet will be a wooden plywood the place that the frame will likely be screwed on the top as well as on the perimeters. It needs to be noted here that a perforated hardboard (Pegboard) will probably be used to place and align the PV Cells this also Pegboard will lay on the surface of the wooden backsheet and fitted inside wooden frame.


5.) Junction Box


The junction box is the place the terminal wires and bypass diodes can be found and concealed. The terminal wires are just the positive and negative wires using the series connections with the Solar cells and can be attached to another cell, a charge controller, battery power system, in order to an inverter, depending on the system design. The bypass diode is really a protective mechanism that prevent power from returning to the solar panel when it's not producing electricity as with the situation if it is evening.


You will find junction boxes suitable for factory-built solar power systems which can be now available to get online especially from China. If you are not tight on time, you can find web wait for delivery or maybe you can just obtain a regular electrical junction box from the local home improvement center. The intention of the junction box is to protect the terminals (positive and negative terminals) from water, dust, and also other elements. This can be in which the two wires (red for positive and black for negative) will be coming from. The opposite end of these two wires may also be protected by by using a PV accessory called MC4 that may even be purchased online together with the PV junction box.


6.) Encapsulant


Encapsulant sheets prevent water and dirt from infiltrating the solar modules and function shock-absorbers that protect the Solar cells. They have got this adhesive bonding chance to the glass, the Electricity cells, along with the backsheet similar to a glue but stronger. Encapsulants are often created from Ethylene-Vinyl Acetate or EVA and they are applied using lamination machines and procedures. Solar panel manufacturers utilize a vacuum as well as a large oven to seal and cure the EVA sheet to the solar panels. Many of us don't have the ability to do this however, many continue to have tried and failed although some had varying levels of success.


Encapsulants are thin plastic sheets which are usually laminated on top and bottom parts of the solar cell sheet. Underneath encapsulant could be the layer into the backsheet in which the solar panels are in fact placed and supported. Within our project, we're going to instead work with a latex acrylic paint. This paint will not be placed on the pv cells because when attempted, will not result in an equal distribution or putting on the liquid for the surface of the cells which may degrade performance. The paint will likely be applied to the wooden frame, wooden backsheet, also to the Pegboard. This Latex Acrylic paint should be able to protect the wooden parts from Ultra violet rays which enable it to better resist blistering and cracking overtime. This paint, although water-soluble, can dry quickly and becomes water-resistant.

Admin · 14 vistas · Escribir un comentario
En282016

Exactly what are Solar power panels?

air pollution - The sun's rays will be the primary source of energy on this planet and sunlight can be converted directly into electricity using solar panel systems. Electricity has become indispensable in life. It powers the machines that most us use daily.


So, what exactly are solar panel systems? Let's say you could make your individual?


In this article, we will teach you a basic technique of building your own personal functional screen.


THE COMPONENTS


A cell is generally produced from six (6) components namely the PV (photovoltaic) cell or solar cell which generates the electricity, the glass which takes care of and protects the solar panels, the frame which offers rigidity, the backsheet the place that the cells are laid, the junction box where the wirings are enclosed and connected, along with the encapsulant which serves as adhesives.


Since most people doesn't have use of equipment in manufacturing solar power panels, you will need to note and understand those six components for that you manage to plan the types of materials necessary to create a do-it-yourself or home-made solar power.


The types of materials needed on the way to create a solar panel have to be available for sale locally or on the web and should not exceed the expense of a new solar panel or does not take a long time to develop.


1.) PV Cell


The first thing to consider when building your own solar panel could be the solar cell.


Photovoltaic (PV) cell or solar cell converts visible light into electricity. One (1) solar cell however is just not enough to make a usable volume of electricity just like the microbot in Baymax (Hero 6) which only becomes useful when combined as a group. This basic unit generates a DC (dc) voltage of 0.5 one volt even though this is reasonable, the voltage continues to be too small for most applications. To create a useful DC voltage, the solar cells are connected in series and after that encapsulated in modules making the solar power. If an individual cell generates 0.5 volt which is associated with another cell in series, the two cells should then be able to produce 1 volt and they will then be called a module. A typical module usually consists of 28 to 36 cells in series. A 28-cell module should be able to produce roughly 14 volts (28 x 0.5 = 14VDC) that's enough to charge a 12V battery or power 12V devices.


Connecting a couple of solar cells require that you have a basic knowledge of series and parallel connection which has similarities to connecting batteries to make up an assortment storage system.


There's 2 most common cells that can be purchased in the market; a monocrystalline cell and a polycrystalline cell. These two can have precisely the same size, 156mm x 156mm, however the main difference would be efficiency. You should purchase additional cells to serve as backup if you happen to fail on a few of the cells i.e. bad solder, broken cell, scratched, etc.


Monocrystalline cells are usually black and octagonal fit. Such a solar cell consists of the highest and purest grade silicon which makes them expensive. But they're the most beneficial of all of solar panels and are almost always a choice of solar contractors when space is a factor to look into in having this power they need to attain based on their solar system design.


Polycrystalline Electricity cells are seen as their bluish color and rectangular shape. These cells are made in a much easier process which lowers the purity of the silicon content as well as lowers the efficiency from the end result.


Generally, monocrystalline cells tend to be more efficient than polycrystalline cells however this doesn't imply that monocrystalline cells perform and outputs more power than polycrystalline cells. Solar cell efficiency has something related to the size of the cells and each solar power or cells offer an efficiency rating determined by standard tests whenever they were manufactured. This rating is often in percentage along with the common values range between 15% to 20%.


2.) Glass


The glass protects the Electricity cells while allowing optimal sunlight to secure. These are typically made from anti-reflective materials. Tempered glass will be the selection of material nowadays even for unknown and new manufacturers however, there remain those who utilize flat plate glass on the solar panels. Tempered glass are created by chemical or thermal means which is often stronger than plate glass rendering it more expensive to make however the cost of manufacturing them today is cheap and cost-effective. Flat plate glass creates sharp and long shards when broken instead of tempered glass which shatters safely in small pieces upon impact, for this reason additionally they refer to it safety glass. It ought to be noted here that most amorphous solar power systems uses flat plate glass due to the way the panel is made.


Tempered glass is the thing that manufacturers use in mass producing their solar power systems. In your DIY project, we advise to make use of Plexiglas also known as acrylic glass that's safer as opposed to regular normal glass from your local shop. It's kind of expensive than regular glass but is weather resistant and break easily. The Plexiglas may also be screwed or glued easily towards the frame.


3.) Frame


A frame is generally manufactured from anodized aluminum which provides structure and rigidity on the solar module. These aluminum frames can also be meant to be compatible with most solar mounting systems and grounding equipment for straightforward and safe installation on a roof or on the ground.


The frame in a factory-built solar panel is generally the aluminum part where all sides of the solar power sheet are inserted. Consider it as a skeletal rectangular frame. The screen sheet incidentally is composed of another 4 components and they are layered and laminated from the following order all the way through; the tempered glass, top encapsulant, the solar cells, bottom encapsulant, then this backsheet. In your DIY solar power, i will be utilizing a wooden frame as well as the end-result could be something analogous into a picture frame the place that the picture is the cells glued with a non-conductive board, the glass for the Plexiglas top cover, and also the wooden part since the frame and backsheet.


4.) Backsheet


The backsheet may be the layer of plastic film about the back top of the module. This is the only layer protecting the module from unsafe DC voltage. The principle aim of the backsheet is always to insulate and protect the handler from shock and supply the safest, efficient, and dependable electrical conductivity possible.


The backsheet might be a wooden plywood where the frame will probably be screwed on top and on the edges. It must be noted here that a perforated hardboard (Pegboard) is going to be accustomed to place and align the Solar cells and this Pegboard will sit down on top of the wooden backsheet and fitted within the wooden frame.


5.) Junction Box


The junction box is when the terminal wires and bypass diodes are placed and concealed. The terminal wires are simply the negative and positive wires depending on the series connections with the PV Cells and can be associated with another cell, a charge controller, a battery system, in order to an inverter, depending on the system design. The bypass diode is often a protective mechanism that prevent power from ok the screen if it's not producing electricity as with the case when it is nightime.


You'll find junction boxes designed for factory-built solar panels which are available nowadays to purchase online especially from China. If you are not short on time, you can find on the web and wait for an delivery or perhaps you can just buy a regular electrical junction box out of your local home improvement store. The goal of the junction box is to protect the terminals (bad and the good terminals) from water, dust, and also other elements. This is also in which the two wires (red for positive and black for negative) will likely be received from. The other end present in wires can even be paid by using a PV accessory called MC4 that may be also purchased online together with the PV junction box.


6.) Encapsulant


Encapsulant sheets prevent water and dirt from infiltrating the solar modules and serve as shock-absorbers that protect the Solar cells. They've this adhesive bonding chance to the glass, the Solar cells, and also the backsheet such as a glue but stronger. Encapsulants usually are made of Ethylene-Vinyl Acetate or EVA and so are applied using lamination machines and procedures. Solar power manufacturers use a vacuum as well as a large oven to effectively seal and cure the EVA sheet on the solar power systems. Many of us would not have the capability to do this but some still have tried and failed although some had varying numbers of success.


Encapsulants are thin plastic sheets which might be usually laminated at the top and bottom aspects of the solar cell sheet. Underneath encapsulant could be the layer into the backsheet where the cells are actually placed and supported. Within our project, we are going to instead work with a latex acrylic paint. This paint won't be applied to the solar cells because when attempted, will not likely result in the same distribution or using the liquid on the surface of the cells which could degrade performance. The paint is going to be put on the wooden frame, wooden backsheet, and also to the Pegboard. This Latex Acrylic paint are able to protect the wooden parts from UV rays and will better resist blistering and cracking overtime. This paint, although water-soluble, can dry quickly and becomes water-resistant.

Admin · 18 vistas · Escribir un comentario
En282016

Sell your house San Antonio Texas

Stop foreclosure San Antonio Texas - Need to sell your house fast? We buy houses fast in San Antonio TX area. Need to stop or avoid foreclosure? Do you need to sell your inherited or probate property? We provide quick debt relief and mortage relief. Call Now


210-693-1533

Admin · 16 vistas · Escribir un comentario

1, 2, 3 ... 8 ... 15  Página siguiente